Short answer: water your Philodendron Selloum every 1–2 weeks — every 1–2 weeks; let top soil dry. That is the starting point, not a rule to follow blindly: the right moment to water is when the soil tells you it is ready, so let the top inch or two of soil dry out before you water again. A plant watered on a fixed calendar, without checking the soil, is watered wrong half the time — too often in winter, when it is barely growing, and not often enough in a hot, bright summer.
Philodendron Selloum is a big self-heading philodendron — it grows into a tree-like floor plant with a thick trunk and huge, deeply lobed leaves that can span well over half a metre across. A mature plant is a major piece of furniture, not a shelf plant, and it needs a large, heavy pot to match. All that leaf area means a selloum drinks a lot in summer, and a large pot of soil can hide a wet bottom layer long after the surface looks dry.
Use our watering calculator to work out a starting point for your pot size, and the watering schedule generator to build a routine around it — but treat both as a starting point. The soil check below is what decides whether today is watering day.
Philodendron Selloum at a glance
| Care factor | What this plant needs |
|---|---|
| Botanical name | Thaumatophyllum bipinnatifidum |
| Water | every 1–2 weeks; let top soil dry |
| Light | medium to bright indirect |
| Humidity | moderate to high |
| Temperature | 65–85°F |
How to check whether it needs water
The finger test is the most reliable check you have. Push your finger an inch or two into the soil: if the top feels dry, it is time to water; if it still feels damp, wait a few days and check again. Check in two or three spots, not just at the rim, because a root ball dries unevenly — dry at the edges and wet in the middle is common in larger pots.
With a plant this size, the finger test needs to go deep — push your finger a full two inches into the mix, and check in two or three spots around the pot, because a big root ball dries unevenly.
A moisture meter is a useful second opinion in a large pot, where your finger cannot reach the bottom — read it in two or three places, and use it alongside the finger test, not instead of it. Pot weight is the third check: lift the pot just after watering, when it is heaviest, and again a few days later. A pot that is ready for water feels noticeably lighter, and once you know the weight of your own pot wet and dry, you can judge it in seconds.
Watering through the seasons
Philodendrons grow in spring and summer and slow down in autumn and winter, and watering follows that rhythm. In summer, in a warm bright room, expect the weekly end of the range; in winter, growth slows, the soil stays wet much longer, and the gap stretches towards two weeks. Keep the routine steady rather than changing it suddenly — a plant watered on a summer schedule all winter is the classic way to rot the roots.
A selloum in a warm, bright room keeps growing through much of the year and may stay near the weekly end of its range in summer. In a cold winter it slows sharply; a large pot of soil can stay wet for weeks, which is when root rot takes hold.
What changes how often you water
Pot size and material. A small pot dries out far faster than a large one, and a plant that has outgrown its pot dries out faster still, because there is less soil holding water. Terracotta is porous and pulls moisture out of the soil, so a plant in terracotta needs water more often than the same plant in plastic or glazed ceramic. Pot size is the biggest variable with a selloum: a mature plant in a 30 cm pot holds far more wet soil than its roots can use in winter. Terracotta dries faster than plastic, which helps a plant that likes its soil to dry between waterings, and a heavy ceramic pot stops a top-heavy selloum from toppling.
Light. Light drives growth, and growth drives water use. A Philodendron Selloum in medium to bright indirect light grows steadily and drinks steadily; the same plant in a darker spot barely grows and the soil stays wet much longer. Direct sun dries the soil fast and can scorch the leaves, so bright indirect light is the balance to aim for. Our grow-light calculator can help you work out whether your spot is bright enough.
Humidity. This plant likes moderate to high humidity. In dry air the leaves lose water faster and the soil dries sooner; in humid air the plant holds onto its moisture and the soil stays damp longer. Our humidity and temperature checker can tell you whether your room suits this plant. A humidifier is the only reliable way to raise humidity indoors — misting wets the leaves for a few minutes and does almost nothing for the air.
Temperature. This plant likes temperatures of 65–85°F. In a warm room it grows and drinks faster; in a cool room it slows down and the soil stays wet longer. A plant chilled by a cold window or a draught uses almost no water, and watering it on a normal schedule while it is cold is a fast route to rot.
Signs of overwatering
Philodendrons are forgiving plants, but overwatering is still the fastest way to kill one. The signs build up gradually, so catch them early. The earliest sign is soil that never seems to dry: the top stays dark and damp for a week or more after watering, and the pot feels heavy every time you lift it. The huge leaves droop heavily and the lower ones yellow; a selloum that has been overwatered can also develop a sour smell from the soil.
- Yellow leaves, especially the lower ones. Yellow lower leaves are the classic overwatering sign — the roots are sitting wet and cannot take up oxygen, so the oldest leaves yellow and drop first.
- Soft stems and a sour smell from the soil. Root rot sets in when soil stays soggy; the roots turn soft and black, the stems soften at the base, and the soil smells sour or musty.
If you see these signs, stop watering and let the soil dry out. If the plant is very wet, take it out of the pot and check the roots — healthy roots are firm and pale, rotten ones are soft, black and smell bad — cut away anything rotten, and repot in fresh, free-draining mix in a pot with drainage holes. Our repotting calculator can help with the new pot size.
Signs of underwatering
Philodendrons cope with a missed watering better than with too much water, but a plant that is regularly left dry will show it. The leaf edges brown and the whole plant looks limp and thirsty, and growth stalls — new leaves stay small and unfurl slowly.
A thirsty plant usually recovers well: water it thoroughly, let the excess drain, and the leaves should lift and plump up within a day or two. If the soil has dried out so much that water runs straight through without soaking in, stand the pot in a tray of water for 15–20 minutes so the mix can rehydrate, then let it drain fully.
How to water it properly
How you water matters as much as how often. Philodendrons want a thorough soak followed by a proper dry-out, not little sips every few days. Water a selloum in two rounds: water once, wait ten minutes for the mix to absorb it, then water again until it runs from the drainage holes. Large pots of peat-based mix can shed water down the sides if they have dried out, so a second pass makes sure the root ball actually gets wet.
Top watering is the usual method: pour slowly and evenly over the whole surface until water runs freely from the drainage holes — a fast pour can run down the sides of a dry pot without wetting the root ball at all. Bottom watering also works well: stand the pot in a few centimetres of water for 15–20 minutes so the soil draws the water up, then lift it out and let it drain completely. It wets the soil evenly without getting water on the leaves.
Ordinary tap water is usually fine for philodendrons. If your tap water is very hard, the salts can build up in the soil over time — flushing the pot with plain water every few months washes the excess away. Always use room-temperature water — cold water straight from the tap can shock the roots, especially in winter. And always use a pot with drainage holes: without them, water has nowhere to go, the bottom of the pot stays wet, and root rot follows no matter how careful your schedule is. After watering, empty the saucer so the plant never sits in standing water.
Frequently asked questions
How often should I water Philodendron Selloum?
Water every 1–2 weeks — every 1–2 weeks; let top soil dry. Treat that as a starting point: always check the soil first and let the top inch or two of soil dry out before you water again. In a warm, bright summer you will be at the shorter end of the range; in a cool winter, at the longer end.
Should I water on a fixed schedule?
No. A fixed schedule ignores the season, the weather, the light in your room and how fast your particular pot dries out. Check the soil with your finger before every watering, and water only when it is ready. A schedule can remind you to check — it should never decide for you.
Can I use tap water for my philodendron?
Yes, ordinary tap water is usually fine. Let it stand overnight so it reaches room temperature, and flush the pot with plain water every few months if your tap water is very hard, to wash away built-up salts.
How do I know if I have overwatered it?
Yellow lower leaves, soft stems, soil that stays damp for a week or more, and leaves dropping are the usual signs. Let the soil dry out, and if the plant is very wet, check the roots — soft, black, smelly roots mean rot, and you should cut them away and repot in fresh mix.
My selloum is huge — how much water should I give it each time?
There is no fixed amount: water until it runs freely from the drainage holes, then empty the saucer. A big pot needs a lot of water to wet the whole root ball, but what matters is that the excess drains away and the soil then dries before the next watering.